Do the Kindle Scribe and reMarkable 2 use the same screensaver size?

The Kindle Scribe needs a 1860 x 2480 pixel screensaver and the reMarkable 2 needs 1404 x 1872. They do not share a panel, so one image cannot fit both — export each separately.

Which has the sharper screen?

The Kindle Scribe, at 300 ppi against 226 ppi. That gap is visible in thin linework and small type: the denser panel holds detail the other one softens, so an intricate image should be simplified before it goes on the lower-density screen.

Which should I size for if I own both?

Keep two files. Sizing for one and scaling it to the other reintroduces exactly the softness you avoided by cropping precisely in the first place. Export at 1860 x 2480 for the Kindle Scribe and 1404 x 1872 for the reMarkable 2.

Kindle Scribe vs reMarkable 2

The Kindle Scribe needs 1860 × 2480 px and the reMarkable 2 needs 1404 × 1872 px. They do not share a panel, so one image cannot fit both. Density differs too: 300 ppi against 226 ppi.

The two large writing tablets get cross-shopped constantly, and their screens are far less similar than their spec sheets suggest. Both are around 10 inches, but the Scribe packs roughly 1.75 times as many pixels into that area.

Specifications Side by Side

Screen specifications for the Kindle Scribe and the reMarkable 2
	Kindle Scribe	reMarkable 2
Screensaver size	1860 × 2480 px	1404 × 1872 px
Screen size	10.2-inch	10.3-inch
Pixel density	300 ppi	226 ppi
Aspect ratio	1:1.33	1:1.33
Panel	Greyscale e-ink	Greyscale e-ink
Manufacturer	Amazon	reMarkable

The bottom line: No shared image, and no shared approach either. The Scribe's 300 ppi panel resolves fine linework and small type that the reMarkable 2 turns to mush at 226 ppi, so a detailed illustration that works on one should be simplified for the other. The reMarkable also has no frontlight, so it is only ever as bright as the room — high-contrast images with plenty of white hold up far better there.

Choosing an Image for Each

Kindle Scribe

The largest Kindle screen by a wide margin, so it shows detail that would be lost on a 6-inch panel — fine linework, small type and subtle gradients all survive here.

Kindle Scribe screensaver size →

reMarkable 2

The reMarkable has no frontlight, so its screen is only ever as bright as the room. High-contrast images with plenty of white hold up far better here than dark or low-contrast ones.

reMarkable 2 screensaver size →

Setting a Screensaver: Two Different Processes

This is where the two devices separate most sharply. The image file may or may not be shared, but the route onto the device is not.

Kindle Scribe

Kindle has no official custom screensaver setting. The standard non-jailbreak workaround is to turn your image into an EPUB whose cover is that image, send it to the device, and let the lock screen show the current book's cover. The cover setting is hidden entirely on ad-supported Kindles, so ads have to be removed from the device first.

Resize the image. Size the image to your Kindle's exact screen resolution using the resizer above, then download it.
Convert it to an EPUB cover. Use Calibre or an image-to-EPUB converter to build an EPUB whose cover image is the file you just downloaded.
Send it to your Kindle. Email the EPUB to your Send to Kindle address, or upload it through the Send to Kindle web page.
Turn on the cover setting. On the Kindle, open Settings > Device Options and enable the setting that shows the current book's cover on the lock screen. Depending on firmware it is labelled Show Cover or Display Cover, and it does not appear at all on ad-supported devices.
Open the book and sleep the device. Sync, open the new EPUB so it becomes the current book, then put the Kindle to sleep. The lock screen shows your image.

Full Kindle screensaver guide →

reMarkable 2

reMarkable shows a fixed suspended screen rather than a user-selectable one. Changing it means replacing the image file on the device itself, which requires connecting over SSH or using a third-party tool built for that purpose.

Resize the image. Size the image to the reMarkable's exact screen resolution using the resizer above, then download it as a PNG.
Choose how to get onto the device. Either enable the developer SSH access shown in the device settings, or use a third-party reMarkable customization tool that handles the file transfer for you.
Replace the suspended screen image. Back up the existing suspended screen file first, then replace it with your own image using the same filename.
Restart the device. Reboot, then suspend the device to confirm the new image appears.

Kindle Scribe vs reMarkable 2 FAQ

Do the Kindle Scribe and reMarkable 2 use the same screensaver size?: The Kindle Scribe needs a 1860 x 2480 pixel screensaver and the reMarkable 2 needs 1404 x 1872. They do not share a panel, so one image cannot fit both — export each separately.
Which has the sharper screen?: The Kindle Scribe, at 300 ppi against 226 ppi. That gap is visible in thin linework and small type: the denser panel holds detail the other one softens, so an intricate image should be simplified before it goes on the lower-density screen.
Is the setup process different?: Yes, completely. Kindle Scribe: Kindle has no official custom screensaver setting. The standard non-jailbreak workaround is to turn your image into an EPUB whose cover is that image, send it to the device, and let the lock screen show the current book's cover. The cover setting is hidden entirely on ad-supported Kindles, so ads have to be removed from the device first. reMarkable 2: reMarkable shows a fixed suspended screen rather than a user-selectable one. Changing it means replacing the image file on the device itself, which requires connecting over SSH or using a third-party tool built for that purpose.
Which should I size for if I own both?: Keep two files. Sizing for one and scaling it to the other reintroduces exactly the softness you avoided by cropping precisely in the first place. Export at 1860 x 2480 for the Kindle Scribe and 1404 x 1872 for the reMarkable 2.

Related Comparisons

See every e-reader screensaver size →